{"id":3682,"date":"2026-10-22T03:09:21","date_gmt":"2026-10-21T19:09:21","guid":{"rendered":"http:\/\/www.hewilson.com\/blog\/?p=3682"},"modified":"2026-10-22T03:09:21","modified_gmt":"2026-10-21T19:09:21","slug":"how-do-you-prevent-corrosion-of-measuring-devices-4a35-1c27a3","status":"publish","type":"post","link":"http:\/\/www.hewilson.com\/blog\/2026\/10\/22\/how-do-you-prevent-corrosion-of-measuring-devices-4a35-1c27a3\/","title":{"rendered":"How do you prevent corrosion of measuring devices?"},"content":{"rendered":"

Hey there! If you\u2019ve ever worked with measuring devices\u2014whether you\u2019re a plant manager, field tech, or someone who relies on precision tools day in and day out\u2014you know corrosion can be a total nightmare. One spot of rust on a pressure gauge thread, a tiny corroded trace on a temperature sensor circuit, or pitting on a load cell plate doesn\u2019t just look bad\u2014it throws your readings off, leads to downtime, and can even compromise safety if you\u2019re working in industries like oil & gas, food processing, or manufacturing. As a measuring devices supplier, I\u2019ve seen this play out way too often over the years: a client calls panicking because their brand-new flow meter\u2019s already giving inconsistent numbers, and it turns out they skipped a simple step that would\u2019ve stopped corrosion in its tracks. Today, I\u2019m breaking down exactly how we help our customers prevent this mess, no fancy tech required just practical, science-backed moves. Measuring Devices<\/a><\/p>\n

<\/p>\n

First, let\u2019s keep this real: corrosion isn\u2019t just \u201crust on metal\u201d\u2014it\u2019s a chemical reaction, plain and simple. Most measuring devices have parts made of metal (steel, brass, aluminum) or even sensitive electronics that degrade when exposed to moisture, chemicals, salt, or oxygen. The worst part? It creeps in where you least expect it: the seam between a sensor housing and its cover, the threads that connect a gauge to a pipe, or even inside a tiny circuit board where a little condensation builds up. The good news is, you can target the root cause before it becomes a problem.<\/p>\n

Let\u2019s start with the basics you might already know\u2014but we\u2019ve learned the hard way that people skip these because they seem too small. First up: material selection matters way more than some guys think. When you\u2019re picking a measuring device for, say, a coastal refinery where salt is in the air, or a food plant that uses steam and washing chemicals, grabbing a cheap steel gauge is a straight-up bad call. We always advise clients to match the device\u2019s materials to their environment. For salty, high-humidity areas, we lean on 316 stainless steel (way more corrosion-resistant than the regular 304 you see on cheap tools) or even Hastelloy for extra harsh chemical environments. For food-grade setups, we use brass with a nickel coating to avoid reacting with cleaning agents, or plastic housings for sensors that only need to measure non-corrosive liquids. Wait, I\u2019ll admit\u2014once a client tried to save 20% on a water treatment sensor by going with a 304 steel version, and it corroded so bad in 6 months they had to replace 12 units. That mistake cost them way more than the upfront savings would\u2019ve.<\/p>\n

Next: surface preparation and initial coatings. A lot of people buy a device, unbox it, and install it immediately\u2014no prep. But if the surface has tiny scratches, mill scale (that rough, flaky stuff left from manufacturing), or even leftover oil from production, that\u2019s where corrosion starts. We never ship our devices with a \u201cone-and-done\u201d coating; we give each a light, custom coating depending on where it\u2019s going. For outdoor installations, it\u2019s a clear epoxy or polyurethane coat that blocks moisture. For threaded parts, we apply a thin PTFE tape or anti-seize compound before installation\u2014this does double duty: it prevents the threads from seizing up, and it creates a barrier between the metal threads that would otherwise rub together and trap moisture. Pro tip from our techs: don\u2019t overdo the anti-seize\u2014too much can get into the device and mess with readings. We\u2019ve had a flow meter give a wrong reading because a tech slathered so much grease on the threads it clogged the impulse line. Oops.<\/p>\n

Then there\u2019s sealings and gaskets\u2014these are your first line of defense against external elements. Every measuring device that\u2019s installed outdoors or near liquids needs a proper seal. A lot of cheap devices use paper gaskets that crumble after a few months; we use EPDM or Viton gaskets\u2014they\u2019re flexible, don\u2019t break down from heat or chemicals, and create a tight fit between the housing and the process connection. Also, make sure you\u2019re not leaving any gaps where wires or tubes go into the device. We supply cable glands with rubber seals that compress around the wire\u2014no wire means no gap for moisture or dust to sneak in. Last year, a farm client called us because their irrigation level sensor was reading 2 feet off, and we found water had seeped through the cable gap because they used a random clamp instead of our gland. Fixing that seal and re-calibrating fixed it instantly.<\/p>\n

Now, the stuff you do after installation: regular maintenance that\u2019s actually useful, not just \u201ccheck the box.\u201d A lot of people only look at their measuring devices when something breaks, but a 10-minute check every 3 months can catch corrosion before it\u2019s serious. What to look for? Any discoloration on metal parts, tiny pits (those are corrosion starting to eat through), or any fuzzy white powder (that\u2019s salt residue from condensation) on the housing. For devices in harsh environments, we suggest a deep clean once a quarter\u2014use a mild, non-abrasive cleaner, not a harsh solvent that can strip the coating. And if you find a spot starting to rust on a steel part? Sand it down gently, apply a touch of epoxy paint, and re-seal it. That\u2019s way cheaper than replacing the whole device.<\/p>\n

Wait, there\u2019s a big one people forget: humidity and condensation control indoors too. If your devices are in a plant room with no AC, or stored in a warehouse that swings between hot and cold, condensation builds up inside the device\u2014even if it\u2019s sealed. We tell clients two things here: first, make sure any device stored before installation is kept in a dry, climate-controlled space. Second, for permanent installations in high-humidity spots, add a desiccant breather to the housing. That\u2019s a small component that lets air in but traps moisture inside a little packet of drying agent. We had a manufacturing client who lost 8 temperature sensors in a year because of condensation\u2014adding breathers fixed it, and they haven\u2019t had a problem since.<\/p>\n

Also, process control checks: if your device is measuring corrosive fluids (like acid in a chemical plant, or brine in a seafood processing line), even the best material will degrade over time. We suggest setting up a periodic test where you check the device against a reference standard\u2014like a calibrated gauge that you know is accurate. If the readings start drifting, pull the device out and inspect it for internal corrosion. A lot of modern measuring devices (like ultrasonic level sensors or magnetic flow meters) have internal diagnostic alerts that\u2019ll flag if something\u2019s off\u2014make sure you\u2019re paying attention to those, not just ignoring them because \u201cit worked last week.\u201d<\/p>\n

Let\u2019s talk about mistakes to avoid, because I see these all the time. First, don\u2019t use generic cleaners on your devices. A lot of techs grab a bottle of degreaser to clean the housing, but if that degreaser has harsh solvents, it can break down the sealant or coating on the device. Stick to the mild cleaners we recommend. Second, don\u2019t skip calibration when you install a new device. Calibration isn\u2019t just for accuracy\u2014it\u2019s also a chance to check that all the seals are tight and there\u2019s no internal corrosion from shipping. Third, don\u2019t use the same device for a job it\u2019s not designed for. A gauge made for water shouldn\u2019t be used for acid\u2014even if it fits the pipe. That\u2019s a quick way to corrode the internals.<\/p>\n

<\/p>\n

At the end of the day, preventing corrosion on measuring devices isn\u2019t rocket science\u2014it\u2019s about matching the tool to the job, doing a little prep, and keeping up with basic maintenance. We\u2019ve worked with hundreds of clients, from small shops to big refineries, and the ones who stick to these steps almost never have corrosion-related issues. If you\u2019re dealing with consistent corrosion on your measuring devices, or you\u2019re not sure which setup is right for your environment, hit us up to chat\u2014we don\u2019t just sell tools, we help you keep them working for years. No sales pitch, just straight talk about what\u2019s worked for our customers.<\/p>\n

Youth Pickleball Paddle<\/a> References:<\/p>\n

    \n
  1. ASME B31.3-2022, Process Piping, American Society of Mechanical Engineers.<\/li>\n
  2. NACE International Standard SP0177-2018, Control of External Corrosion on Underground or Submerged Metallic Piping Systems.<\/li>\n
  3. Measuring Equipment Corrosion Prevention Guidelines, Instrumentation, Systems, and Automation Society (ISA).<\/li>\n
  4. Corrosion Resistance of Stainless Steels for Industrial Applications, World Steel Association.<\/li>\n<\/ol>\n
    \n

    Hebei Honde Industrial Trade Imp. & Exp. Co., Ltd.<\/a><\/p>\n

    Address: Room 1904, Yintai International Building, Guang’an Street, Chang’an District, Shijiazhuang, Hebei Province
    E-mail: activeballs@hbhonde.com
    WebSite:     https:\/\/www.activeballs.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there! If you\u2019ve ever worked with measuring devices\u2014whether you\u2019re a plant manager, field tech, or … How do you prevent corrosion of measuring devices?<\/span>Read more<\/a><\/p>\n","protected":false},"author":950,"featured_media":3682,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3645],"class_list":["post-3682","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-measuring-devices-49d8-1c6029"],"_links":{"self":[{"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/posts\/3682","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/users\/950"}],"replies":[{"embeddable":true,"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/comments?post=3682"}],"version-history":[{"count":0,"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/posts\/3682\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/posts\/3682"}],"wp:attachment":[{"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/media?parent=3682"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/categories?post=3682"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.hewilson.com\/blog\/wp-json\/wp\/v2\/tags?post=3682"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}